Sale!

Cobb Stage 2 Power Package (Black) – Ford F-150 Raptor 2017-2020 / Limited 2019-2020 COBB

Original price was: $ 2.500,00.Current price is: $ 625,00.

SKU: mode_8046298005790 Category: Power Packages / Bundles Tags: 2017, 2018, 2019, 2020, Accessport, Air Intake Systems, Air Intakes, Cold Air Intake, Cold Air Intakes, Engine Power Packages, EPA:Compliant, F-150, F-150 Raptor, F150, F150 Raptor, FMIC, FOR0050020BK, Ford, Ford F-150, Front Mount Intercooler, front mount intercoolers, Intake, Intakes, Intercooler, Intercooler Kit, intercoolers, Limited, Non-CARB:Y, Power Packages, Race Intake, Raptor, Short Ram Intake, Short Ram Intakes, Stage 2+

Description
shopping

EMISSIONS

This part is legal under the provisions of EPA’s Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA’s Anti-Tampering Policy.

NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.

Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending. Once testing is complete with California, and an EO number is issued, this product will be updated to 50-state legal status.

DESCRIPTION

Raptor 2017-2020, Limited 2019-2020

Simple ECU flashing with gauge package! The new in-cabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters), and mounting options (choose from 1,000s of standard vehicle mounts). And what’s looks without brains? More processing power, memory, and storage to flash faster while saving all of your maps and logs.

The COBB Intake for the second generation Ford Raptor checks every box that enthusiasts expect from a high-quality bolt on upgrade. The factory piping from the air-box is replaced with dual 3″ mandrel bent aluminum tubing to maximize airflow while custom silicone couplers ensure perfect OEM-like fitment.

The COBB Front Mount Intercooler (FMIC) for your F-150 Raptor is the easiest way to drastically improve power when coupled with tuning from the V3 Accessport. The much larger 24″ wide x 14″ tall x 3.5″ thick core produces a significant volume increase compared to stock, resulting in minimal pressure drop despite the significant increase in size. Straight forward installation requires minor trimming on the back side of the grille and maintains the factory Adaptive Cruise Control bracket when using the stock bumper.

WHY?

The Accessport is the world’s best selling, most flexible, and easiest to use ECU upgrade solution for your Ford F-150 Raptor. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Follow our staged upgrade path with pre-loaded Off The Shelf (OTS) maps or use custom mapping for any modification level. It’s the last engine management solution you’ll ever need.

FEATURES

Ford Stage 2 Power Package Black F-150 Ecoboost Raptor / Limited

Accessport V3
COBB Intake System with 3″ Mandrel Bent Tubing
Black COBB FMIC
COBB Vehicle Badge

FORD RAPTOR SPECIFIC FEATURES:

AUTO START-STOP ADJUSTMENT: A common complaint with the Raptor was the bothersome auto start/stop setting. There was no easy way to turn it off and keep it off with subsequent key cycles. The Auto Start-Stop feature accomplishes just that! With this feature you can set enable/disable Auto Start-Stop and the setting will be retained even after the vehicle is turned off. To use this feature go to “Tune” > “Adjustments” > “Auto Start-Stop” > and then select “1” if you want it to be enabled or “0” to disable.

FUEL PUMP CONTROL: You guessed it. This feature allows control of the in-tank fuel pump. This is especially useful if you want to drain the fuel tank to run different fuels, depressurize the fuel system to change injectors, or are needing to drain the fuel tank for any other reason. To use this feature (see Accessport steps below), with the engine running set the value to -1. This will turn off the fuel pump and the engine will shut down when fuel pressure reaches its lowest. You can then disconnect the fuel line and route it to a container. You can then key ON and set the value to 1 turning the fuel pump back on which would then drain your fuel tank.

DYNAMIC PEDAL CONTROL: This feature can be used to enhance or dull your accelerator pedal response. You can set this value from -5 to 10. Each reduction from 0 to -5 will decrease pedal response by 20%. This could be useful if you’re wanting to limit power or fuel consumption. Each increment from 0 to 10 will increase your pedal response by 10%. This will make the truck feel faster since the throttle will open more with less pedal input. Below is a graphical representation comparing throttle pedal input (x axis) with the amount the throttle body is opening (y axis) for each setting. Also shown is the pathway on the Accessport to adjust this setting.

VALET MODE: Valet Mode can be used to reduce maximum power output by limiting throttle to about 25%. A value of 1 will enable valet mode. A value of 0 will return to normal. This setting will be retained even through key cycles and does not require changing maps! Below shows how to adjust Valet Mode on the Accessport.

Fast Shipping with Professional Packaging

Through our long-term relationship with UPS, FedEx, DHL and many other world-class carriers, we can offer various shipping options. Our warehouse staff are trained to pack your goods precisely according to the specifications we offer. The goods you send us are checked thoroughly and securely secured prior to shipment. We ship to thousands clients every day from all over the world. This shows our commitment to become the biggest online retailer in the world. Both Europe as well as the USA have distribution and warehouse centers.

Note: Orders that contain more than one item are assigned a particular processing time based on the individual item.

Before shipping before shipping, we'll conduct a thorough inspection of the items you've purchased. Today, the majority of orders will be shipped within 48 hours. It is expected that delivery will take between 3 and 7 days.

Returns

The stock market is always changing. It's not entirely managed by us, as we are involved with multiple entities, including the factory and our storage. Stocks can be changed at any moment. Be aware that your order is out of stock once the order has been placed.

Our policy lasts for 30 days. We cannot replace or refund your purchase after 30 days since the purchase.

To be returned, it must be unopened and in the same condition as when you received it. It should also be in its original packaging.